Wi-Fi Options
To change Wi-Fi settings, select Wi-Fi Options on the lower-left side of the page. This expands
options to include the following:
WPS. Click this button to activate WPS (Wi-Fi Protected Setup) for two minutes so that
•
compatible Wi-Fi devices can connect to the Wi-Fi network without having to manually enter
the network key.
Broadcast Wi-Fi name (SSID). Select this option to broadcast the SSID so it appears on Found
•
Wi-Fi Network lists. This option must be enabled to activate WPS (above).
Wi-Fi Multimedia (WMM). Select this option to provide higher priority for multimedia in the
•
transmission of data. This option must be enabled when using 802.11n mode.
Wi-Fi Privacy Separation. Select this option to prevent connected devices from
•
communicating with each other. By default, this option is disabled.
When you are done making changes, select Save Changes to finalize and accept the new settings.
Device Settings
The Device Settings page in the Settings section includes three subtabs, or sections:
Preferences allows you to set preferences for the MiFi M100 device.
•
Admin Password allows you to change the MiFi M100 admin password. (See
•
on page 33.)
Backup and Restore allows you to backup and restore your MiFi M100 settings. (See
•
and Restore
on page 34.)
Settings > Wi-Fi Settings - Wi-Fi Options
31
Admin Password
Backup