Replacing The 4G Lte Sim Card - Novatel MIFI M100 User Manual

➍
Replace the cover by setting it on the MiFi M100 where the notches align, then press on the
cover until it clicks into place and is flat across the entire bottom surface.

Replacing the 4G LTE SIM Card

Your SIM (Subscriber Identity Module) card is a small rectangular plastic card that stores your phone
number and important information about your wireless service. Your MiFi M100 comes with the SIM
card already installed.
To remove the 4G LTE SIM card:
➊
Take off the MiFi M100 battery cover and remove the battery. (See
page 11.)
➋
Locate the SIM Card protector.
➌
Use a fingernail or unfolded paper clip to slide the SIM card out of the protector into the bay.
Then carefully remove the SIM card.
NOTE
Should your 4G SIM card be lost or damaged, contact your network operator.
To install a new 4G LTE SIM card:
➊
Take off the MiFi M100 battery cover and remove the battery. (See
page 11.)
➋
If necessary, remove the SIM card from the SIM card package, being careful not to touch the
gold-colored contacts.
➌
Hold the card with the gold-colored contact points facing down and the notched corner on
the upper left..
12
Replacing the Battery
Replacing the Battery
on
on