Table of Contents
Advertisement
24
Chapter 2 Installing the i2050 Software Phone
QoS
Use this screen to enable Quality of Service (QoS) support on the i2050 Software Phone.
Table 2 Quality of Service (QoS)
Attribute
Description
On
Select this option to turn 802.1 QoS on.
When you select this option and the QoS Service is installed and running, the i2050 Software
Phone adds 802.1q to the i2050 Software Phone packets. It will also assign 802.1p as per the
Communications Server definition (default 6).
Off
Select this option to turn 802.1 QoS off.
When you select this option, the i2050 Software Phone does not add 802.1q to the i2050
Software Phone packets, regardless of whether the QoS Server is present.
Automatic
Select this option if you want the i2050 Software Phone to decide if the 802.1 QoS is used.
detection
When you select this option, the i2050 Software Phone will attempt to connect with 802.1q added
to the packets. If the attempt is successful, then the i2050 Software Phone will use 802.1q for the
call. If the attempt fails (there is a timeout after approximately 1 second), the i2050 Software
Phone will attempt to connect again without adding 802.1q to the packets.
This is the default option.
Apply to all users Users with administrator privileges (as determined by Windows) can apply the QoS settings to all
users on this computer.
P0988431 Issue 03
Advertisement
Table of Contents
