System Data (All Users) - Nortel i2050 Installation Manual

Table 8 Current User data
Data Description
Headset The setting for the Headset microphone. The comment "Muted" indicates the device is muted by
Microphone Windows.
Source 1: Select Sound Devices Headset Microphone
Source 2: i2050-> Configure Audio -> Headset Microphone
Headset Speaker The setting for the Headset speaker.
Source 2: Select Sound Devices Headset Speaker
Source 2: i2050-> Configure Audio -> Headset Speaker
Ringing Speaker The setting for the Ringer volume.
Source 3: Select Sound Devices Ringing Speaker
Source 2: i2050-> Configure Audio -> Ringing Speaker

System Data (All Users)

The System Data information applies to all users on the computer. Many individual items can be
overridden by a user. To determine a value in use, look first in the Current User Data table. If no
value is there then look in the System Data table.
Table 9 System data
Data Description
Software The i2050 Software Phone version.
Version
Source 1: About Version
Source 2: Hardware ID Firmware Version
Source 3: i2050->About
Hardware ID The value saved on the Communications Server can be viewed on the i2050 Software Phone's
Services menu.
Source 1: Hardware ID Hardware ID
Source 2: Services - Set Info - HWID
Note: On CSE 1000 and Meridian 1 switches, the value displayed on the Service menu and the
value displayed in the i2050 Diagnostic Utility is slightly different. The first two bytes (31-38) saved
with the i2050 Software Phone are displayed in the Services menu as their ascii values (18).
Local Address Source: Listener IP
Server An IP address and port of the server. If DHCP is being used, it will be indicated as such.
Server Type Source: Server Type
Trace Source: Trace
Current Skin Source: i2050->Select Skin
Language Source: i2050->Select Language
Selected
Local Jitter If the computer is overriding the Communications Server assigned jitter values, this is indicated by
Settings the presence of this item. If this item is not present, the application is Using Communication Server
values.
Source: Advanced Audio Override Communications Server values
Use 802.1p Source: QoS 802.1p
Chapter 4 Nortel Networks i2050 Diagnostic Utility
i2050 Software Phone Installation Guide
47