Utility Output; Updating The Diagnostic Information; Updating The Diagnostic Information Manually - Nortel i2050 Installation Manual

48 Chapter 4 Nortel Networks i2050 Diagnostic Utility
Table 9 System data
Data Description
I use a modem Slow connection indicates the check box is checked. Fast Connection indicates the check box is
to connect cleared.
Source: Select Sound Devices I use a modem to connect to the network
PC Audio Buffer Computer Audio Buffer (Audio Quality Slider)
Source: Select Sound Devices Audio Quality slider
Headset This value will typically report "No Value Assigned" unless a user with administrator privileges has
Microphone checked the Apply to all users check box on the Select Sound Devices tab.
Source: Select Sound Devices Headset Microphone
Headset This value will typically report "No Value Assigned" unless a user with administrator privileges has
Speaker checked the Apply to all users check box on the Select Sound Devices tab.
Source: Select Sound Devices Headset Speaker
Ringing This value will typically report "No Value Assigned" unless a user with administrator privileges has
Speaker checked the Apply to all users check box on the Select Sound Devices tab.
Source: Select Sound Devices Ringing Speaker

Utility Output

This section contains the results saved from the ping and trace route dialog. It only appears if the
results have been saved. It is overwritten each time the utility dialog saves its data.

Updating the diagnostic information

The diagnostic information that appears on the i2050 Diagnostic Utility is the information that was
current when you started the i2050 Diagnostic Utility. You can update the diagnostic information
manually or you can configure the i2050 Diagnostic Utility to update the information
automatically.
Note: The options for updating the diagnostic information are not available when you are
viewing information from a file.

Updating the diagnostic information manually

To update the diagnostic information to reflect any changes that occurred since you started the
i2050 Diagnostic Utility:
1
On the View menu, click Refresh.
Or
Click the Refresh button on the Toolbar.
The diagnostic information is updated to reflect the most current information.
P0988431 Issue 03