Configuring The I2050 Diagnostic Utility To Automatically Update The Diagnostic Information; Saving The Current Diagnostic Information To A File; Printing The Diagnostic Information - Nortel i2050 Installation Manual

Configuring the i2050 Diagnostic Utility to automatically update the
diagnostic information
To configure the i2050 Diagnostic Utility to automatically update the diagnostic information, you
need to set the interval for refresh and turn on the Auto-Refresh option.
1
On the View menu, click Set Refresh Interval.
2
Enter the number of minutes that the i2050 Diagnostic Utility waits between updating the
diagnostic information.
3
Click the OK button
4
On the View menu, click Auto-Refresh.
Or
Click the Auto-Refresh button on the Toolbar.
The i2050 Diagnostic Utility updates the diagnostic information at the frequency you specified for
the Set Refresh Interval.

Saving the current diagnostic information to a file

You can save the diagnostic information you are viewing to a file. You can then view this file later
using a web browser or the i2050 Diagnostic Utility, or you can send it to your i2050 Software
Phone support personnel.
To save the current diagnostic information to a file:
1
On the File menu, click Save as.
Or
Click the Save button on the Toolbar.
2
Move to the directory to which you want to save the diagnostic file.
3
Enter a file name and click Save.

Printing the diagnostic information

You can print the diagnostic information you are viewing.
To print the diagnostic information:
1 On the File menu, click Print.
Or
Click the Print button on the Toolbar.
Chapter 4 Nortel Networks i2050 Diagnostic Utility
i2050 Software Phone Installation Guide
49