3Com 6040 Installation Manual page 35

3Com Router 6000 Family
Installation Manual
*
*******************************************
Copyright© 2003-2004 by 3COM-3COM TECH CO., LTD.
Compiled at Wed Jul 20 16:35:23 EDT 2005
Testing memory...OK!
512M bytes SDRAM Memory
Hardware Version is 2.0
CPLD
Press Ctrl-B to enter Boot Menu
Press <Ctrl+B> to have the system enter Boot Menu. Otherwise, the system starts
decompressing the program and displays:
System is self-decompressing......................................
OK!
System is starting...
Starting at 0x10000...
User interface Con 0 is available.
Press ENTER to get started.
Press <Enter>. The console screen displays:
<3Com>
The prompt indicates that the router has entered user view and is ready for configuration.
Note:
Immediately after "3Com 6000 Router, 10.05" appears, "System starts booting ...
(1.01)" disappears. (10.05 is the version of the Boot ROM.)
To have the system enter Boot Menu, press <Ctrl+B> within three seconds after
"Press Ctrl-B to enter Boot Menu..." appears; otherwise, the system starts
decompressing the program. To enter Boot Menu after that, you must reboot the
router.
If the bootstrap discovers that the version of the Boot ROM in the VRP is
inconsistent with the one in use, it automatically upgrade the Boot ROM program
and displays:
The current starting file is main application file—flash:/b14d008!
Upgrade Bootrom............!
Download completed.
Please wait,it needs a long time######
Writing into Boot ROM Succeeds.
System will reboot...
Version is 1.0
3Com Corporation
Starting and Configuring the Router
*
0
4-6
Chapter 1