To Enter The Qos Settings For Voip Trunks - Nortel SRG50 Configuration Manual

Table 16 Main office QoS settings (Sheet 2 of 2)
Media parameter
G.723 payload size (ms)
G.711 payload size (ms)
Incremental payload size (yes/no)
T.38 fax (yes/no)
Force G.711 for 3.1k audio (yes/no)
Fax Transport
Provide in-band ringback
In Element Manager, enter QoS settings for VoIP trunks through the Telephony Resources panel.

To enter the QoS settings for VoIP trunks

1
In Element Manager, navigate to Configuration > Resources > Telephony Resources.
2 On the Modules panel, locate the Module type column and select the IP Trunks row (see the
figure Modules panel, IP Trunks
3
On the Details for Module subpanel, select the H323 Media Parameters tab or the SIP
Media Parameters tab depending on which media parameters you want to configure.
4 Refer to the main office QoS settings recorded in the table
70 and enter the appropriate values.
Figure 15 Modules panel, IP Trunks
Chapter 6 Setting up the private VoIP network
H.323 settings
Supported for IP telephones for local calls only. See
telephone codec and jitter settings
--
--
on page 71).
SIP settings
on page 55 for details.
--
--
--
Main office QoS settings
SRG50 Configuration Guide
71
IP
on page