Chapter 5
IP telephones setup and configuration
IP telephone setup and DN configuration are described in detail in the IP Telephone Installation
and Configuration Guide and the Networking Configuration Guide (NN40020-603), respectively.
SRG-specific procedures and settings include:
•
Registration password
•
Local mode indication
•
IP telephone codec and jitter settings
•
Telephone (DN) records configuration
•
Received numbers configuration
•
DHCP settings configuration
•
Call forwarding options
•
Configuration settings for redirected phones
•
Test Local Mode
•
Features in local mode
•
911 Emergency Services Support
Registration password
If a registration password is configured on the SRG, the IP telephone installer must enter the
password before the telephone can be configured.
To set the IP telephone registration password
1
In Element Manager, navigate to Configuration > Resources > Telephony Resources.
2
On the Modules panel, locate the Module type column and select the IP & Application Sets
row (see the figure
3
On the Details for Module: subpanel, select the IP Terminal Global Settings tab.
on page 53
on page 55
on page 59
on page 60
on page 60
on page 61
on page 62
Telephony Resources panel, IP and App Sets
on page 55
on page 56
on page 61
on page 63
on page 54).
SRG50 Configuration Guide
53