Basic Procedures; Basic Procedures Navigation - Nortel BSG12aw Installation Manual

Basic procedures

The following sections describe basic procedures that you use to prepare the Business Services
Gateway 8-port (BSG8ew) and Business Services Gateway 12-port (BSG12ew/aw/tw) for
maintenance and restarting the BSG8ew or BSG12ew/aw/tw after maintenance.

Basic procedures navigation

• "Shutting down the BSG8ew/12ew/aw/tw" on page 63
• "Restarting the BSG8ew/12ew/aw/tw" on page 63
• "Removing a rack-mounted BSG8ew/12ew/aw/tw" on page 64
• "Removing a wall-mounted BSG8ew" on page 64
• "Removing a desktop-mounted BSG8ew/12ew/aw/tw" on page 64
• "Disconnecting the cables" on page 65
• "Connecting the cables" on page 65
Shutting down the BSG8ew/12ew/aw/tw
Use this procedure to shut down the BSG8ew/12ew/aw/tw. For procedures on how to use the
BSG8ew/12ew/aw/tw Web User Interface (UI), see Administration (NN47928-600).
Procedure steps
Step
1
2
Restarting the BSG8ew/12ew/aw/tw
Use this procedure to restart the BSG8ew/12ew/aw/tw.
Procedure steps
Step
1
2
Action
Use the Web UI to check for a recent backup of the BSG8ew/12ew/aw/tw
system programming before powering down the BSG.
Unplug the unit.
Action
BSG8ew/12ew/aw/tw. For more information, see
Connect power to the
"Connecting power to the BSG8ew" on page 45
BSG12ew/aw/tw" on page 46
If the most recent configuration is not restored after powering up and logging in
to the unit, then check for most recent backup.
End
and
.
"Connecting power to the
Installation
63