60
WiFi module replacement
Variable definitions
Use the data in the following table to use the fields in the logon page.
Variable
User Name
Password
Saving the running configuration to Flash using the CLI
Use this procedure to save the running configuration using the CLI.
Procedure steps
Step
1
2
3
Variable definitions
Use the data in the following table to use the fields in the logon page.
Variable
User Name
Password
Replacing the WiFi module
Use this procedure to replace the WiFi module in the BSG12ew/aw/tw.
Prerequisites
•
If the system is still operating, perform the procedure
aw/tw" on page
NN47928-302
NN47928-302
Value
Specify the user name. The
default logon name is
nnadmin.
Specify the password. The
default password is
PlsChgMe!.
Action
Launch an SSH session.
Log on to the BSG12ew/aw/tw using the user ID and password.
At the prompt, enter the following command:
write startup-config
Value
Specify the user name. The
default logon name is
nnadmin.
Specify the password. The
default password is
PlsChgMe!.
63.
End
"Shutting down the BSG8ew/12ew/