Nortel BSG12aw Installation Manual page 49

Procedure steps
Step Action
1 Connect one end of the RS232 cable to the serial port of the laptop.
2 Connect the other end of the RS232 cable to the console port of the BSG12ew/
aw/tw.
Variable definitions
Use the data in the following table to help you connect the console to the BSG12ew/aw/tw for
debugging purposes.
Variable Value
RS 232 Following are the RS 232 connection settings.
•
•
•
•
baud rate = 9600
bits = 8 bits
Parity = None
Flow control = None
End
Cable connection 49
Installation