Nortel BSG12aw Installation Manual page 64

64 Basic procedures
Removing a rack-mounted BSG8ew/12ew/aw/tw
Use this procedure to remove a rack-mounted BSG8ew/12ew/aw/tw.
Procedure steps
Step
1
2
3
4
5
Removing a wall-mounted BSG8ew
Use this procedure to remove a wall-mounted BSG8ew.
Procedure steps
Step
1
2
3
4
Removing a desktop-mounted BSG8ew/12ew/aw/tw
Use this procedure to remove a desktop-mounted BSG8ew/12ew/aw/tw.
Procedure steps
Step
NN47928-302 NN47928-302
Action
Remove all of the cables from the unit.
To disconnect cables, see
If the unit is mounted on top of another unit, slide that unit forward until it
disengages from the clips on the lower unit. Lift the unit off of the top of the other
unit.
If the unit is secured to the rack-mount shelf with screws, remove these screws
from the bottom of the rack-mount shelf.
Slide the unit forward until it disengages from the clips on the rack-mount shelf.
Lift the unit off of the rack-mount shelf and set it on a flat, clean, static-free
surface.
Action
Remove all of the cables from the unit.
To disconnect cables, see
Lift the unit until it disengages from the clips on the wall-mount bracket.
Pull the unit out and away from the wall-mount bracket.
Set the unit on a flat, clean, static-free surface.
Action
End
"Disconnecting the cables" on page
End
"Disconnecting the cables" on page
End
65.
65.