Table of Contents
Advertisement
Installation options
The following sections describe the various physical installation options for the Business Services
Gateway 8-port (BSG8ew) and the Business Services Gateway 12-port (BSG12ew/aw/tw).
Installation options navigation
•
"Prerequisites to installation options" on page 35
•
"Installing the BSG8ew/12ew/aw/tw on a desktop or shelf" on page 36
•
"Installing the BSG8ew on a wall" on page 37
•
"Installing the BSG8ew/12ew/aw/tw in an equipment rack" on page 41
•
"Installing the BSG8ew/12ew/aw/tw on top of another unit" on page 43
Prerequisites to installation options
•
Similar units, such as BCM50, BES50, and BSG8ew/12ew/aw/tw, are designed to install
side-by-side or on top of one another. Take this option into account when planning your
system installation.
•
BSG12ew/aw/tw does not provide wall-mount upgrade kit for wall installation.
•
If you are stacking multiple BSG8ew/12ew/aw/tw units, activate WiFi on only the bottom
unit to prevent radio interference.
•
Verify that your selected installation method meets the acceptable environmental
conditions.
•
To keep the BSG8ew/12ew/aw/tw operating at the optimal internal temperature, keep the
top, sides, and rear clear of obstructions and away from the exhaust of other equipment.
•
Do not place anything other than a BSG8ew/12ew/aw/tw, BCM50, or BES50 on top of a
BSG8ew/12ew/aw/tw.
35
Installation
Advertisement
Chapters
Table of Contents
