Toshiba satellite A20 series Maintenance Manual page 398

4.30 Fluorescent Lamp
2. Remove the screws (E) on both sides.
Figure 4-151 Removing the screws from the sides
3. Flip the module over again (with the top of the module facing up) and remove the two
latches that are close to the lamp.
Figure 4-152 Removing the latches close to the lamp
Satellite A20 Maintenance Manual (960-444)
The maximum allowed releasing torque is
0.1078N ¥ m (1.1kgf ¥ cm).
Latch
4 Replacement Procedures
4-193