Toshiba satellite A20 series Maintenance Manual page 370

4.30 Fluorescent Lamp 4 Replacement Procedures
Assembling the 15.0-inch SXGA+ Sharp Fluorescent Lamp
To assemble the 15.0-inch SXGA+ Sharp fluorescent lamp, follow the steps below and refer
to Figures 4-123 to 4-137.
1. Stick the four double-sided tapes (N, O, P, Q) on the P-chassis.
Standard for edge of P-chassis
Do not make the P-chassis over this line.
(P)
(N)
0 to 1 mm
(O)
(Q)
Figure 4-123 Replacing Sharp fluorescent lamp (SXGA+) (11)
Satellite A20 Maintenance Manual (960-444) 4-165