Toshiba satellite A20 series Maintenance Manual page 319

4 Replacement Procedures 4.30 Fluorescent Lamp
Assembling the 15.0-inch XGA Sharp Fluorescent Lamp
To assemble the 15.0-inch Sharp XGA fluorescent lamp, follow the steps below and refer to
figures 4-77 to 4-89.
1. Stick the four double-sided tapes (N, O, P, Q) on the P-chassis.
Standard for edge of P-chassis
(P) Do not make the P-chassis over this line.
(N)
0 to 1 mm
(O)
(Q)
Figure 4-77 Replacing Sharp fluorescent lamp (XGA) (11)
4-114 Satellite A20 Maintenance Manual (960-444)