Front Membrane Assy - Toshiba satellite A20 series Maintenance Manual

4.16 Front Membrane ASSY

4.16 Front Membrane ASSY
Removing the Front Membrane ASSY
To remove the front membrane ASSY, follow the steps below and refer to figure 4-26.
1. Disconnect the front membrane cable from PJ3260 on the system board.
2. Remove the following screws securing the front membrane holder.
• M2.5×4
3. Remove the front membrane holder and the front membrane ASSY.
PJ3260
Front membrane cable
Figure 4-26 Removing the Front membrane ASSY
Satellite A20 Maintenance Manual (960-444)
FLAT HEAD screw
4 Replacement Procedures
×2
M2.5×4 FLAT HEAD screw
Front membrane ASSY
Front membrane holder
4-47