4 Replacement Procedures
4.25 Touch Pad Switch
Removing the Touch Pad Switch
To remove the touch pad switch, follow the steps below and refer to figure 4-36.
1. Remove the following screws securing the touch pad switch.
• M2.5×4
2. Removing the touch pad switches.
Touch pad switch
Installing the Touch Pad Switch
To install the touch pad switch, follow the steps below and refer to figure 4-36.
1. Place the touch pad switches on the back of the palm rest.
2. Secure the touch pad switch with the following screws.
• M2.5×4
4-64
TAPPING screw
Figure 4-36 Removing the Touch pad switch
TAPPING screw
4.25 Touch Pad Switch
×3
M2.5×4 TAPPING screw
×3
Satellite A20 Maintenance Manual (960-444)