4.17 FIR Board
4.17 FIR Board
Removing the FIR Board
To remove the FIR board, follow the steps below and refer to figure 4-27.
1. Remove the following screws securing the FIR board.
• M2.5×6
2. Disconnect the FIR board from PJ9500 on the system board.
M2.5×6 FLAT HEAD screws
PJ9610
FIR Board
PJ9500
Satellite A20 Maintenance Manual (960-444)
FLAT HEAD screws
Figure 4-27 Removing the FIR board
4 Replacement Procedures
×2
4-49