Toshiba satellite A20 series Maintenance Manual page 227

4 Replacement Procedures
Installing the ODD
To install the ODD, follow the steps below and refer to figures 4-8 and 4-9.
1. Seat the plastic frame on the side of the ODD, and secure it with the following
screws.
• M2×3 SUPER FLAT screw
• M2×5 SUPER FLAT screw
2. Slide the ODD and connect the drive to PJ1820 on the system board.
3. Secure the ODD with the following screws.
• M2.5×4
4-22
FLAT HEAD screw
×4
×1
×2
Satellite A20 Maintenance Manual (960-444)
4.7 ODD