Toshiba satellite A20 series Maintenance Manual page 376

4.30 Fluorescent Lamp
6. Place the LCD panel (I) on the backlight unit (H).
NOTE: Make sure there is no dust between the LCD panel and backlight unit. If
any dust is found, remove it with crepe tape or others which has no remaining of
paste.
unit
(H) Backlight
Make
installed in the guide rib surely.
Figure 4-129 Replacing Sharp fluorescent lamp (SXGA+) (17)
Satellite A20 Maintenance Manual (960-444)
(I) LCD panel
sure the LCD panel
4 Replacement Procedures
Guide rib
Guide rib
is
Guide rib
Guide rib
4-171