Resetting A Default Volume; Selecting A Ring Tone; Carrier Voip; Nortel Ip Phone 1120E User Guide (Cicm - Nortel 1120E User Manual

8
9

Resetting a default volume

Follow this procedure to reset the default volume of the handset, the
headset, or the handsfree speaker.
Step
1
2
3
4
5
6

Selecting a ring tone

Follow this procedure to select a ring tone.
You can listen to a ring tone before you select it, through the Play and Stop
options.
Prerequisites
The system administrator must grant you permission to change your ring
tone.
Copyright © 2007, Nortel Networks
.
this menu without saving any changes made to the default volume
level for the selected audio device. Pressing reset will set the volume
level to the nominal level. Press OK and the settings will be saved.
You may also press Play to hear the volume level of the Ringer or
Buzzer volume settings.
Also included in the menu for default volumes is the Help option.
Action
From the main menu, select and open Audio.
The Audio menu opens.
Navigate through the menu and select Default Volumes.
Select the transducer you want to reset to the default.
Press Ok, or the send key.
The Default Volumes menu opens.
Scroll through the menu and select Default.
Press Apply to confirm the action.
The default volume is applied the next time the transducer is used.

Carrier VoIP

Nortel IP Phone 1120E User Guide (CICM)

NN10300-022 02.01 Standard

(I)SN10 15 June 2007
Selecting a ring tone 51
—End—
—End—