Selecting A Ring Tone - Nortel IP Phone 1110 User Manual

60 Using the Terminal menu

Selecting a ring tone

Follow this procedure to select a ring tone.
Prerequisites
You must have permission to edit your audio profile to perform this
procedure. Permission to edit your audio profile is granted by your system
administrator.
Step
1
2
3
4
5
6
Copyright © 2006 , Nortel Networks
.
— Press Reset to reset the volume to the previous level.
— Press Ok, or press the send key, when you have the volume
level you want.
•
For Buzzer and Ringer:
— Press Cancel to cancel the request.
— Press Reset to reset the volume to the previous level.
— Press Play to hear the level of the currently selected volume.
— Press Ok, or press the send key, when you have the volume
level you want.
The default volume of the selected speaker is set.
Action
From the main menu, open the Settings menu.
From the Settings menu, open the Terminal menu.
From the Terminal menu, open the Audio menu.
From the Audio menu, select and open Play Ring Patterns.
The list of ring tones opens.
To hear a ring tone before you select it, select one from the list and
press Play. Press Stop to stop the ring tone from playing.
To select a ring tone, press Apply.
Carrier VoIP
Nortel IP Phone 1110 User Guide (CICM)
NN10300-021 1.0 Draft
(I)SN10 30 November 2006
—End—
—End—
Nortel Networks Confidential