Normal Playback - Hyundai TRC 718AU3 Instruction Manual

CD/MP3 OPERATION
GENERAL OPERATION
PLAY/PAUSE
SKIP + &
SKIP -
STOP
PLAYBACK
1. Set the "FUNCTION" selector to "CD/MP3/USB" mode.
2. Open the CD door and place a CD/MP3 disc with the label up on the CD compartment.
3. Close the CD door.
4. Focus search is performed if disc is inside.
Total number of tracks is read and appears on the display.
5. Playback will start automatically from the first track.
6. Adjust the "VOLUME" control to the desired level.
7. Press the "PLAY/PAUSE" button again when you want to stop playback temporarily.
8. Press the "STOP" button when finished.
PROGRAM
Up to 20 tracks can be programmed for disc play in any order.
Be sure to press the "STOP" button before use.
1. Press the "MODE" button, the display will show "P01" and flash.
2. Select desired track by using the "SKIP +" or "SKIP -" button.
(You may select a desired album by pressing the "ALBUM" button).
3. Press the "MODE" button again to confirm desired track into the program memory.
4. Repeat step 2 and 3 to enter additional tracks into the program memory.
5. When all the desired tracks have been programmed, press the "PLAY/PAUSE" button to
play the disc in the order you have programmed.
6. Press the "STOP" button twice to terminate programmed playback.
MODE
Press the "MODE" button before or during playing CD/MP3 disc, each press switches
the mode function as follows:
1. REPEAT 1
2. REPEAT ALBUM ( *MP3 ONLY )
3. REPEAT ALL
4. RANDOM

5. NORMAL PLAYBACK

Press to start playing CD/MP3 disc.
Press again to stop playing CD/MP3 operation temporarily.
Press again to resume playback.
Press to go to the next track or back to the previous track.
Press and hold while playing until you find the point
of the sound.
Press to stop all CD/MP3 operation.
ENG - 39
ENG