Programmed Playback - Hyundai RC 406 Instruction Manual

Repeat Playback
This feature allows you to continuously repeat a single track or the entire disc.
To Repeat A Single Track
Press the REPEAT/ALL button once. The Repeat indicator flashes.
Press the B. SKIP or F. SKIP buttons to select the desired track, then press
the PLAY/PAUSE button to begin Repeat Playback of the selected track.
To Repeat The Entire Disc
Press the REPEAT/ALL button twice. The Repeat indicator remains On .
Press the PLAY/PAUSE button to begin Repeat Playback of the entire disc.
To cancel Repeat Playback press the REPEAT/ALL button until the Repeat Indicator goes Off .
Repeat Playback is also canceled by pressing the STOP button, or setting the Function selector to
the AM or FM position.

PROGRAMMED PLAYBACK

This feature allows you to program up to 20 tracks on a disc for playback in any
desired order.
Note: You can program tracks while a disc is stopped or while the disc is playing.
1.) Press the PROGRAM button to enter the Program Mode. The Program number brief-
ly shows 0 1 , then 0 0 and the Program indicator flash.
2.) Press the F. SKIP or B. SKIP buttons to select the first track number you wish to en-
ter in the program memory. Example: Track Number 0 8 .
3.) When the desired track number appears on the display, press the PROGRAM button
again to enter that track in memory.The Program number briefly shows 0 2 , then 0 0
flashes.
4.) Repeat Steps 2-3, selecting a different track number each time until you have entered up to 20
tracks in the program memory.
Note: You may program the same track number to play multiple times in the program sequence
if desired.
5.) Press the PLAY/PAUSE button to begin Programmed Playback. The PROGRAM
indicator stops flashing and remains On . Playback will begin with the first track
you programmed and will continue until the last programmed track has played.
Playback will begin with the first track you programmed and will continue until
the last programmed track has played.
6.) After the last track has played the player stops and the display shows the total number of tracks
on the disc . Howeve r the program sequence remains in the memory.
To repeat the programmed sequence, press the PROGRAM button first and then press
the PLAY/PAUSE button.
To play the disc normally, starting with Track 1, just press the PLAY/PAUSE button.
7.) The programmed sequence may be canceled by lifting the clamper arm, switching to the AM,
FM or shutting the system Off .
EN - 35
EN