Page 1
19.2 VOLT, 4-1/2” AngLe grinder 99675 SeT up And OperATing inSTrucTiOnS ® distributed exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com read this material before using this product. Failure to do so can result in serious injury.
Page 3
ANSI-approved and breath- use personal protective equip- ing protection must be NIOSH-ap- ment. Always wear eye protection. proved for the specific hazards in the Safety equipment such as dust mask, work area. SKU 99675 For technical questions, please call 1-800-444-3353. Page 3...
Page 5
The spinning accessory the tool out of your control. may grab the surface and pull the power tool out of your control. SKU 99675 For technical questions, please call 1-800-444-3353. Page 5...
If you feel any medical or a well ventilated area, and work with physical symptoms related to vibra- approved safety equipment, such as tion (such as tingling, numbness, and those dust masks that are specially SKU 99675 For technical questions, please call 1-800-444-3353. Page 6...
Page 7
Let the tool do the work. To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately. SAVe THeSe inSTrucTiOnS. SKU 99675 For technical questions, please call 1-800-444-3353. Page 7...
SAFeTY inFOrmATiOn section at the beginning of this manual including all text under Spindle Lock subheadings therein before set Button up or use of this product. SKU 99675 For technical questions, please call 1-800-444-3353. Page 8...
Page 9
The blotter should be centered on the grinding wheel and the wheel and blotter should rest flat against the Inner Flange. SKU 99675 For technical questions, please call 1-800-444-3353. Page 9...
Page 10
Push the Safety down and push the Switch (20) forward to start the tool. power Switch Safety Allow the tool to come up to full speed before touching the work material. SKU 99675 For technical questions, please call 1-800-444-3353. Page 10...
Page 11
AFTer uSe, clean external surfaces of the tool with clean cloth. WArning! if the supply cord of this power tool is damaged, it must SKU 99675 For technical questions, please call 1-800-444-3353. Page 11...
ASSuMES ALL riSK AND LiAbiLiTy AriSiNg ouT of HiS or HEr rEPAirS To THE origiNAL ProDuCT or rEPLACEMENT PArTS THErETo, or AriSiNg ouT of HiS or HEr iNSTALLATioN of rEPLACEMENT PArTS THErETo. SKU 99675 For technical questions, please call 1-800-444-3353. Page 12...
Page 13
Charger upper Label Motor Charger Lower Label Wires Logo Label Battery Connector note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 99675 For technical questions, please call 1-800-444-3353. Page 13...
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 record product’s Serial number Here: note: If product has no serial number, record month and year of purchase instead. SKU 99675 For technical questions, please call 1-800-444-3353. Page 14...