Table of Contents
Advertisement
Quick Links
9" Angle Grinder
93179
ASSEMBLY AND OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
©
®
Copyright
2005 by Harbor Freight Tools
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in any shape or form without
the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
For technical questions, please call 1-800-444-3353
SKU 93179
Page 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Chicago Electric 93179
Summary of Contents for Chicago Electric 93179
- Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353...
-
Page 2: Specifications
Power Cords immediately. Damaged Power Cords increase the risk of electric shock. When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These extension cords are rated for outdoor use, and reduce the risk of electric shock. SKU 93179 For technical questions, please call 1-800-444-3353 Specifications "... -
Page 3: Personal Safety
22. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. SKU 93179 For technical questions, please call 1-800-444-3353 Personal Safety (California Health &... -
Page 4: Specific Safety Rules
Maintain labels and nameplates on the tool. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Always wear ANSI approved safety impact eye goggles and heavy work gloves when using the tool. - Page 5 The plug and outlet should look like those in the following illustration. (See Figure DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS Figure B SKU 93179 For technical questions, please call 1-800-444-3353 GROUNDING Tools marked “Double Insulated” do not require grounding.
-
Page 6: Extension Cords
0 - 2.0 2.1 - 3.4 3.5 - 5.0 6.1 - 7.0 7.1 - 12.0 12.1 - 16.0 16.1 - 20.0 SKU 93179 For technical questions, please call 1-800-444-3353 EXTENSION CORDS Extension Cord Length 50 Feet 75 Feet SYMBOLOGY 100 Feet... - Page 7 When unpacking, check to make sure that the product is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. You must install the Wheel Guard (3) before using your Angle Grinder Align the tabs on the Wheel Guard (3) with the indents in the underside of the Gear Housing (19) and press the Guard into place as shown in the photo at right.
- Page 8 7/8”. Do not use wheels of any other size. This grinder has a maximum speed of 6500 rpm. WARNING: Do not use a grinding wheel which is not rated for at least this speed. Using lower speed rated wheels at higher speed may cause the grinding wheel to come apart and be ejected from the grinder at high speed, possibly causing severe personal or property damage.
- Page 9 2. Guide the tool back and forth over the work piece in a steady motion. Do not press down, but allow the weight of the tool to do the work. 3. When cutting with the Angle Grinder, first be sure the grinding wheel has a thin cutting edge. Keep the grinding wheel straight in the cut to prevent the wheel from being damaged.
-
Page 10: Maintenance And Inspection
Clean the tool after each use, and store it properly. Keep it out of reach of children and other unauthorized persons. Protect it from moisture and corrosive materials. SKU 93179 For technical questions, please call 1-800-444-3353 Inspecting the Carbon Brushes (50) -
Page 11: Parts List
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 93179 For technical questions, please call 1-800-444-3353 Parts List Part #... -
Page 12: Assembly Drawing
Assembly Drawing * Grinding Wheel - Part 54 - not shown REV 02/06 SKU 93179 For technical questions, please call 1-800-444-3353 Page 12...
Need help?
Do you have a question about the 93179 and is the answer not in the manual?
Questions and answers