Page 1
MagnesiuM Heavy Duty 7” angle grinDer 97588 set up anD Operating instructiOns ® Distributed exclusively by Harbor Freight tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 visit our website at: http://www.harborfreight.com read this material before using this product. Failure to do so can result in serious injury.
Do not use any adapter SKU 97588 For technical questions, please call 1-800-444-3353. Page 2...
Page 3
Eye protection injury. must be ANSI-approved and breath- use personal protective equip- ing protection must be NIOSH-ap- ment. always wear eye protection. SKU 97588 For technical questions, please call 1-800-444-3353. Page 3...
SKU 97588 For technical questions, please call 1-800-444-3353. Page 4...
Page 5
Do not run the power tool while wear dust mask, hearing protec- carrying it at your side. Accidental tors, gloves and workshop apron contact with the spinning accessory capable of stopping small abra- SKU 97588 For technical questions, please call 1-800-444-3353. Page 5...
Page 6
Electromagnetic fields in close prox- et seq.) imity to heart pacemaker could cause pacemaker interference or pacemak- The warnings, precautions, and in- er failure. In addition, people with structions discussed in this instruction SKU 97588 For technical questions, please call 1-800-444-3353. Page 6...
The opera- tor can control torque reactions or Wheels must be used only for kickback forces, if proper precautions recommended applications. For are taken. example: do not grind with the SKU 97588 For technical questions, please call 1-800-444-3353. Page 7...
Include vibration-free periods each if the use of a guard is recom- day of work. mended for wire brushing, do not allow any interference of the wire SKU 97588 For technical questions, please call 1-800-444-3353. Page 8...
The plug and outlet should look like those in the preceding illustration. (see 3-prong plug and Outlet.) SKU 97588 For technical questions, please call 1-800-444-3353. Page 9...
(see table a.) The smaller the gauge number of the wire, the greater the capacity of the cord. For ex- SKU 97588 For technical questions, please call 1-800-444-3353. Page 10...
150% of the rated amperes. symbology Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current Amperes No Load Revolutions per Minute n 0 xxxx/min. (RPM) SKU 97588 For technical questions, please call 1-800-444-3353. Page 11...
Check the Wheel Guard to ensure it manual including all text under is firmly in place. Adjust if necessary subheadings therein before set before proceeding. up or use of this product. SKU 97588 For technical questions, please call 1-800-444-3353. Page 12...
Button (24) to prevent the Spindle (8) related operations. from turning. Remove the Outer Flange (1). Keep the Inner Flange (3) in position on the Spindle. SKU 97588 For technical questions, please call 1-800-444-3353. Page 13...
Page 14
Inner Flange. Thread disc accessory firmly onto Warning: to prevent serious the Spindle. Wrench tighten onto the injury, blotters must be used for all spindle. grinding wheels they are provided SKU 97588 For technical questions, please call 1-800-444-3353. Page 14...
To prevent accidents, turn off the tool work surface. and disconnect its power supply after use. Clean, then store the tool in- doors out of children’s reach. SKU 97588 For technical questions, please call 1-800-444-3353. Page 15...
Page 16
Caps (41 and 45) from the sides of of the motor vents using dry com- the motor housing. pressed air. Always wear safety glasses when performing this mainte- nance operation. SKU 97588 For technical questions, please call 1-800-444-3353. Page 16...
Page 17
Hold the spring clips to the side and reinsert the old carbon brushes in the same orientation to reduce wear. When installing the carbon brushes, make sure the carbon portions of the carbon brushes contact the motor SKU 97588 For technical questions, please call 1-800-444-3353. Page 17...
BUyER ASSUMES ALL RISk AND LIABILITy ARISING OUT Of HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT Of HIS OR HER INSTALLATION Of REPLACEMENT PARTS THERETO. SKU 97588 For technical questions, please call 1-800-444-3353. Page 18...
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 97588 For technical questions, please call 1-800-444-3353. Page 20...
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 REV 11h SKU 97588 For technical questions, please call 1-800-444-3353. Page 21...