To Select The Ring Tone - Nortel 2210 User Manual

8 Scroll to one of the desired options:
Off
• — ringer is turned off.
PBX
• — ringing uses the distinctive ringing pattern sent to the handset from the call server.
Continuous
• — ringing is continuous.
Short Pulse
• — ringing occurs in short bursts.
Long Pulse
• — ringing occurs in long bursts.
9 Press the Select button (or
10 Do one of the following:
Press UP to return to the previous menu and configure another option.
•
• Press to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.

To select the Ring Tone

Note: Ring Tone is not displayed in the menu when
1
Press when the handset is in the standby state.
2
Press the Up and Down buttons to scroll through the menu and highlight
3 Press the Select button (or
4 Press the Up and Down buttons to scroll through the menu and highlight
5
Press the Select button (or
6 Press the Up and Down buttons to scroll through the menu and highlight
7 Press the Select button (or
8
Scroll to one of the desired options:
• Tone 1
• Tone 2
• Tone 3
• Tone 4
• Tone 5
9 Play
Press the soft key to preview the tone.
Chapter 2 WLAN Handsets overview
OK
) to select the highlighted option.
OK Ring Options
) to select
OK Telephone Ring
) to select
OK Ring Tone
) to select
WLAN IP Handset 2210/2211/2212 User Guide
Ring Cadence
is turned off.
.
.
.
21
Ring Options
.
Telephone Ring
.
Ring Tone
.