Nortel 2210 User Manual page 45

Table 5 WLAN Handset messages, descriptions, and actions
Message
Bad Network IP
Bad Network Mask
Bad Payload Type
Bad Phintl File
Bad Program File
Bad Preshared Key
Bad Tunneled IP
Bad VPN Server IP
B A
or icon
Battery Low
message
and beep
Battery Failure
Battery Failed
Can't Renew DHCP
yyy.yyy.yyy.yyy
Charging ...
Charge Complete
Checking Code
Checking DHCP IP
CRC Code Error
Code Mismatch!
Description
The WLAN Handset is configured wrong. Contact your system administrator.
The WLAN Handset is configured wrong. Contact your system administrator.
There may be a configuration problem
with the handset of the VPN server.
The WLAN Handset software download
files are incorrect or corrupted.
The WLAN Handset software download
files are incorrect or corrupted.
The WLAN Handset is configured wrong. Contact your system administrator.
The WLAN Handset is configured wrong. Contact your system administrator.
The WLAN Handset is configured wrong. Contact your system administrator.
Low battery
The battery pack is not functioning.
The battery pack is damaged or
incompatible with the WLAN Handset.
The DHCP server is not responding to
the initial renewal attempt.
The WLAN Handset is charging in the
Desktop Charger.
The WLAN Handset is now fully charged. No action needed.
The WLAN Handset is checking for a
newer version of software that should be
downloaded.
The WLAN Handset is retrieving DHCP
information from the DHCP server.
The software which has been TFTP
downloaded has a bad redundancy code
check.
The software loaded into the WLAN
Handset is incorrect for the handset
model.
Chapter 5 Troubleshooting
Action
Contact your system administrator.
Contact your system administrator.
Contact your system administrator.
In call: the battery icon (
and a soft beep is heard when the user is
on the WLAN Handset and the battery
charge is low. User has 15–30 minutes of
battery life left.
Not in call: The battery icon (
displays whenever the battery charge is
low. The message
beep indicate a critically low battery
charge. The WLAN Handset will not work
until the battery pack is charged.
Replace the battery pack with a new or
confirmed Nortel battery pack. Any
non-Nortel battery packs will not work.
Replace the battery pack with a new or
confirmed Nortel battery pack. Any
non-Nortel battery packs will not work.
Record the error information and contact
your system administrator.
No action needed.
None. This message lasts for
approximately one second. If message
remains displayed, power off the WLAN
Handset and contact your system
administrator.
None. This is informational only.
Contact your system administrator.
Contact your system administrator.
WLAN IP Handset 2210/2211/2212 User Guide
45
B
) displays
A
)
Low Battery
and a