Remote Surveillance Through Apple Pc; Lan - Eyemax TVST TR SERIES User Manual

Remote Surveillance
①
Go to Main MenuSetupNetworkNetwork interface to enable PPPoE and then
input user name and password received from your ISP. Next, click "Apply". The HD
TVI Hybrid DVR will connect to the server and would give a confirmation message.
②
When accessing the remote interface of the HD TVI Hybrid DVR, user can input WAN
IP to access directly (user can go to Main MenuInformationNetwork interface to
check IP address). The browser will download Active X control.
The following setting steps are as the same as ④ and ⑤ in Point 1.
③

14.3 Remote Surveillance through Apple PC

Note: Because the current plug-in version of client end just only supports 32-bit mode,
so the safari browser shall start 32-bit mode. If the browser is the earlier MACOS
version, the default setting is 32-bit mode and the setting can be skipped.
The setting steps are as follows:
Right click safari icon and select "Show in Finder".
①
Select ApplicationsRight click "Safari. App"Select "Get Info".
②
③ Select "Open in 32- bit mode".

14.3.1 LAN

①
After starting Apple computer, click Apple icon. The following window will pop up.
Please select "System Preferences" "Internet &Wireless" "Network".
HD TVI Hybrid DVR User Manual
58