Snap Setting And Playback By Picture Search; Snap Settings - Eyemax TVST TR SERIES User Manual

Playback

7.5 Snap Setting and Playback by Picture Search

You need to capture pictures first and then play back by picture search.

7.5.1 Snap Settings

 Manual Snap
In the live view mode, right click to dispaly the menu toolbar. Then click
toolbar to capture the picture.
 Auto Snap
Go to Main MenuSetupRecordSnap as shown below. You can set auto snap here.
① Set resolution, image quality, snap time interval and snap number.
② Click "Apply" to save the settings. The system will automatically capture pictures
according to the setup.
 Taking Snapshots on Motion Alarm
① Go to Main MenuSetupAlarmMotionMotion. Enable motion alarm and then set
the motion detection area (see Chapter 9.2 Motion Alarm for details).
② Go to alarm handling setting by click "Setting" button under Trigger. Then checkmark the
snapshot channel and click "OK" button to confirm the settings.
③ Set schedule for motion alarm. The setting steps are similar to normal schedule recording
(See Chapter 6.3 Schedule Recording for details).
④ Click "Apply" to save the settings. The picture will be automatically captured once a
motion alarm happens.
 Taking Snapshots on Sensor Alarm
Some models may support this function.
① Go to Main MenuSetupAlarmSensorSensor. Enable sensor alarm and choose the
sensor type.
② Go to Alarm Handling tab. Then click "Setting" button under Trigger. An alarm trigger
box will pop up. Then select the snapshot channel and click "OK" button to confirm the
settings.
HD TVI Hybrid DVR User Manual
31
on this menu