Ie Remote Surveillance Via Lan & Wan; Lan; Wan - Eyemax TVST TR SERIES User Manual

Remote Surveillance
14.2 IE Remote Surveillance via LAN & WAN
In order to view the HD TVI Hybrid DVR from a network it may be connected to a
LAN/WAN or internet. The network setup should be done accordingly.

14.2.1 LAN

① Go to the HD TVI Hybrid DVR's Main Menu
IP address, Subnet Mask, etc. If using DHCP, please enable DHCP in both the HD TVI
Hybrid DVR and the router.
②
Enter Record Setup to set network video parameters like resolution, frame rate etc.
③
Open IE on a computer on the same network. Input the IP address of the HD TVI Hybrid
DVR in IE address bar and press enter.
④
IE will download ActiveX component automatically. Enter the username and password in
the subsequent window (the default username is admin; the default password is 123456).
Notice: If HTTP port is not 80, add the port number after IP address. For example, set
HTTP port as 82, input IP address like 192.168.0.25:82.

14.2.2 WAN

There are two ways for the HD TVI Hybrid DVR to connect to internet.
1. Connect the device to internet through router or virtual server.
①
Go to Main MenuSetupNetworkNetwork interface to input IP address, Subnet
Mask, etc. If using DHCP, please enable DHCP in both the HD TVI Hybrid DVR and
router.
②
Forward IP address and port number in Virtual Server setup of the router or virtual server.
Configure the firewall to allow accessing the HD TVI Hybrid DVR. (If you have
enabled the UPnP function in both the HD TVI Hybrid DVR and router, you can skip
this step.)
③
If users want to utilize dynamic domain name, please apply for a domain name in a DNS
server supported by the HD TVI Hybrid DVR or router. Then add to the HD TVI Hybrid
DVR or router.
This unit supports www.meibu.com, www.dyndns.com, www.no-ip.com and mintDNS type.
④
Open IE browser, input IP address, or dynamic domain name and enter. If HTTP port is
not 80, add the port number after IP address or domain name.
⑤
IE will download ActiveX automatically. Then a window pops up and asks for user name
and password. Input name and password correctly, and enter to view.
Note: If you cannot download and install ActiveX, please refer to FAQ Q8.
2. Connect the device to internet directly.
HD TVI Hybrid DVR User Manual
 
Setup Network
57

Network tab to input