Eyemax TVST TR SERIES User Manual page 28

Record
Set up rate, resolution, quality, encode and max bit stream according to the actual situation.
Then apply the settings.
Resolution: The higher the resolution is, the clearer the image is.
FPS: The higher the frame rate is, the more fluency the video is. However, more storage
room will be taken up.
Encode: Including CBR and VBR. CBR means that no matter how changeable the video
resources are, the compression bitrate keeps constant. This will not only facilitate the
image quality better in a constant bitrate but also help to calculate the capacity of the
recording. VBR means that the compression bitrate can be adjustable according to the
change of the video resources. This will help you save much storage room.
Image Quality: When VBR is selected, you need to choose image quality. The higher the
image quality you choose, the more bitrate will be required.
Average Bitrate: When VBR is selected, you need to choose image quality.
③ Set expiration time, pre-alarm time and post-alarm time.
Expiration Time: Set the expiration time for recorded video. If the set date is overdue, the
recorded files will be deleted automatically.
Pre-alarm Time: Set the time in seconds to record before the actual recording begins.
Post-alarm Time: Set the time in seconds to record after the actual recording has finished.
④ Set stamp. Go to Stamp tab. In this tab, you can enable or disable the camera name and the
time stamp on the video and choose a position for the stamp on the screen.
HD TVI Hybrid DVR User Manual
23