Eyemax TVST TR SERIES User Manual page 14

Basic Operation
There are two kinds of remote controller. The interface of remote controller is shown as below.
* You shall press P.T.Z button to enter PTZ setting mode, choose a channel and press P.T.Z button again
to hide the P.T.Z control panel. Then you can press preset, cruise, track, wiper or light button to enable
the relevant function.
Button
Power Button
Record Button
-/-- /0-9
Fn1 Button
Multi Button
Next Button
SEQ
Audio
Switch
Direction button
Enter Button
Menu Button
Exit Button
Focus/IRIS/Zoom/PTZ
Preset Button
Cruise Button
Track Button
Wiper Button
Light Button
Clear Button
Fn2 Button
Info Button
Snap Button
Search Button
Cut Button
Backup Button
Zoom Button
PIP Button
9
HD TVI Hybrid DVR User Manual
Function
Switch off—to stop the device
To start recording
Input number or choose camera
Unavailable temporarily
To choose multi screen display mode
To switch the live image
To enter into auto dwell mode
To enable audio output in live mode
To switch the video output
To move cursor in setup or pan/title PTZ
To confirm the choice or setup
To go to menu
To exit the current interface
To control PTZ camera
To enter into preset setting in PTZ mode
To go to cruise setting in PTZ mode
To go to track setting in PTZ mode
To enable wiper function in PTZ mode
To enable light function in PTZ mode
To return to the previous interface
Unavailable temporarily
Get information about the device.
To control playback.Play/Pause/Stop/
Section/ Next Section/Backward/ Forward
To take snapshots manually
To go to search mode
To set the start/end time for backup
To go to backup mode
To zoom in the images
To go to picture in picture setting mode
Previous