Alarm
Select "All" to set the same settings for all channels.
⑥
Click "Apply" button to save the settings.
⑦
⑧
Go to Schedule tab. The setting steps for schedule for motion based alarm are similar to
normal schedule setup (see Chapter 6.3 Schedule Recording for more details).
9.3 Video Loss Alarm
This device can be set up to detect video loss. The setting steps are as follows:
①
Go to Main MenuSetupAlarmVideo Loss.
The setup steps of video loss trigger are similar to "Alarm Handling" (See Sensor
②
Alarm Handling setting for more details).
9.4 Other Alarm
This tab gives a choice to configure alarm for Disk Full, IP Conflict, the Disconnect event,
Disk Attenuation or Disk Lost.
①
Go to Main MenuSetupAlarmOther Alarm.
②
Use the dropdown menu and select the event or the alarm.
③
Check the required trigger options.
If the selected event is "Disk Full", then use the drop down box for "Disk Shortage
Alarm" to choose a threshold value for remaining HDD space. If the threshold value is
reached, the system will trigger the Disk Full Alarm.
Click "Apply" to save the settings.
④
HD TVI Hybrid DVR User Manual
38