T.z - Eyemax TVST TR SERIES User Manual

P.T.Z
Before you control the speed dome, please make sure the speed dome is well connected to the
device. P.T.Z configuration includes two submenus: serial port and advanced.
Serial port settings are as follows:
①
Go to Main MenuSetupP.T.ZSerial Port interface.
② Select "Enable" and set up the value of address, baud rate and protocol according to the
settings of the speed dome.
③ Select "All" to set the same settings for all channels.
【Address】: The address of the PTZ device.
【Baud rate】: Baud rate of the PTZ device. Range form: 110, 300, 600, 1200, 2400, 4800,
9600, 19200, 34800, 57600, 115200, 230400, 460800, 921600.
【Protocol】: Communication protocol of the PTZ device. Range from: NULL, PELCOP,
PELCOD, LILIN, MINKING, NEON, STAR, VIDO, DSCP, VISCA, SAMSUNG, RM110,
HY, N-control.
【Simulative Cruise】: If enabled, no matter whether the PTZ device supports cruise or not,
the presets will cruise.
Advanced settings include preset setting, cruise setting and track setting.
Go to Main MenuSetupP.T.ZAdvanced.
10 P.T.Z
40
HD TVI Hybrid DVR User Manual