Sensor Based Recording - Eyemax TVST TR SERIES User Manual

Record
④ Set schedule for motion alarm. The setting steps are similar to normal schedule recording
(See Chapter 6.3 Schedule Recording for details).
Note: The timelines of these two schedules (schedule for motion based recording and
schedule for motion alarm) must match, otherwise you will not get the record in some
time).

6.5 Sensor Based Recording

Some models may support this function.
① Set schedule for sensor based recording. Go to Main MenuSetupScheduleSensor.
Select channel and then set the schedule. The settings steps of schedule for sensor based
recording are similar to normal schedule recording (See Chapter 6.3 Schedule Recording
for details).
② Go to Main MenuSetupAlarmSensorSensor to see the following figure. Enable
sensor alarm and choose the sensor type.
③ Go to Alarm Handling tab. Then click "Setting" button under Trigger. An alarm trigger
box will pop up. Select "To Record" tab to choose the recording channel and click "OK"
button to confirm the settings.
HD TVI Hybrid DVR User Manual
26