Specifications; Environmental Specifications; Server Specifications; Power Supply Specifications - HP HPE ProLiant ML30 Gen9 User Manual

Specifications

Environmental specifications

Specification
Temperature range*
Operating
Nonoperating
Relative humidity
(noncondensing)
Operating, maximum wet bulb
temperature of 28°C (82.4°F)
Nonoperating, maximum wet
bulb temperature of 38.7°C
(101.7°F)
* All temperature ratings shown are for sea level. An altitude derating of 1° C per 304.8 m (1.8° F per 1,000 ft) to 3048
m (10,000 ft) is applicable. No direct sunlight allowed.

Server specifications

Specification
Height
Depth
Width
Weight (full load, approximate values)
Four-bay LFF non-hot-plug model
Four-bay LFF hot-plug drive model
Eight-bay SFF hot-plug drive model

Power supply specifications

Depending on installed options, the server is configured with one of the following power supplies:
•
HPE 350 W Power Supply (E-star 1.0)
•
HPE 350 W Power Supply (E-star 2.0)
•
HPE 460 W CS Gold Hot-plug Power Supply (92% efficiency)
This power input module is only supported when the two-bay RPS assembly option is installed.
CAUTION: Check the system and power supply input ratings before powering up the server.
For detailed power supply specifications, see the QuickSpecs on the Hewlett Packard Enterprise website
(http://www.hpe.com/info/proliant/powersupply).
Value
0° C to 40° C (32° F to 104° F)
-30° C to 65° C (-22° F to 149° F)
10% to 90%
0% to 95%
Tower model
36.83 cm (14.50 in)
47.50 cm (18.70 in)
17.50 cm (6.89 in)
—
13.1 kg (28.82 lb)
13.6 kg (29.92 lb)
12.4 kg (27.28 lb)
Specifications 96