350W power supply option (E-star 2.0)
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
To install the component:
Power down the server (on page 16).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove the bezel (on page 17).
3.
Place the server on its side with the access panel facing up.
4.
Remove the access panel (on page 18).
5.
Remove the air baffle (on page 20).
6.
Disconnect all power supply cables from the system board, drive cages, and devices.
7.
Remove the power supply.
8.
Install the 350W power supply.
9.
Slide the power supply into the chassis.
a.
Hardware options installation 30