SECTION 5—WHEELCHAIR OPERATION
Hex Mounting Screws
Adjustment
Lock Lever
FIGURE 5.11 Repositioning the Joystick - Van Seat Model
Disconnecting/Connecting the Joysticks
NOTE: For this procedure, refer to FIGURE 5.12.
NOTE: The joystick connector is located at the rear of the seat frame.
SPJ+ Joysticks
1. Hold the light GREY collar portion of the joystick connector with one hand and the
controller connector on the wheelchair in the other and disconnect them by pulling
them apart.
Connecting
The joystick connector and controller connector fit together in one way only. DO
NOT force them together.
1. Hold the light GREY collar portion of the joystick connector with one hand and the
controller connector on the wheelchair in the other and align them.
2. Lightly push to engage the joystick connector and the controller connector.
FIGURE 5.12 Disconnecting/Connecting the Joysticks - SPJ+ Joysticks
Pronto® M94™
Locknuts
Mounting
Bracket
WARNING
Light Grey Collar
Joystick
Connector
42
Arm Frame
Spacers
Joystick Mounting Tube
Controller
Connector
Part No 1122145