7.11 Disconnecting/Connecting the SPJ+
Joysticks
The joystick connector is located at the rear of the seat
frame.
7.11.1 Disconnecting the SPJ+ Joysticks
Hold the light grey collar portion A of the joystick connector B
1.
with one hand and the controller connector C on the wheelchair
in the other and disconnect them by pulling them apart.
7.11.2 Connecting the SPJ+ Joysticks
WARNING!
– The joystick connector and controller connector
fit together in one way only. DO NOT force them
together.
Hold the light grey collar portion A of the joystick connector B
1.
with one hand and the controller connector C on the wheelchair
in the other and align them.
2.
Lightly push to engage the joystick connector and the controller
connector.
1163181-F~00
7.12 Disconnecting/Connecting the CMPJ+
Joysticks
The joystick connector is located at the rear of the seat
frame.
7.12.1 Connecting the CMPJ+ Joysticks
Ensure the gaskets B are installed in the top connector cap
and between network connectors C.
1.
Ensure the latch is pulled away from the network connector.
2.
Connect the network connector to the other connectors.
3.
Top D and Bottom E Connectors - Install connector caps onto
the network connector.
4.
Push the latch in to secure the network connectors and caps.
5.
If necessary secure excess cable using tie-wraps.
Set Up Maintenance
67