Lock Controls; Options - Kenmore 110.8756 Series Use And Care Manual

You can customize your cycles by selecting options.
O Wrinkle Guard90
t@LDI Cyclesignal
LOCK / UNLOCK CONTROLS
WRINKLE GUARD ® 90
WRINKLE GUARD ®90 helps smooth out wrinkles that form when
you cannot unload the dryer promptly at the end of a cycle.
During this option, the dryer periodically starts and stops,
tumbling the load for 90 minutes.
• Press WRINKLE GUARD ®90 to get up to 90 minutes of heat-
free, periodic tumbling at the end of a cycle.
• Stop WRINKLE GUARD ® 90 at any time by pressing
WRINKLE GUARD ®90 or opening the dryer door.
• WRINKLE GUARD ®90 is preset to OFE The Auto Dry cycles
will retain the WRINKLE GUARD ®90 setting. For example, if
you select WRINKLE GUARD ®90 in the Normal cycle,
WRINKLE GUARD ®90 will be on the next time you select the
Normal cycle.
NOTE: WRINKLE GUARD ®90 must be selected with a cycle in
order to work. If you do not select WRINKLE GUARD ®90, the
dryer stops after cool down.
Cycle Signal
The Cycle Signal produces an audible sound when the drying
cycle is finished. Promptly removing clothes at the end of the
cycle reduces wrinkling.
Press CYCLE SIGNAL to turn the signal off.
NOTE: When WRINKLE GUARD ®90 is selected and the Cycle
Signal is on, a tone sounds every 5 minutes until the clothes are
removed, or WRINKLE GUARD ®90 ends.
You can change Auto Cycles, Timed Cycles, Modifiers and
Options anytime before pressing Start.
• Three short tones sound if an unavailable combination is
selected. The last selection will not be accepted.
Changing Cycles after pressing Start
1. Press STOP twice. This ends the current cycle.
2. Select the desired cycle and options.
3. Press and hold START. The dryer starts at the beginning of
the new cycle.
NOTE: If you do not press Start within 5 minutes of selecting the
cycle, the dryer automatically shuts off.
Changing Modifiers and Options after pressing Start
You can change a Modifier or Option anytime before the selected
Modifier or Option begins.
1. Press STOP once.
2. Select the new Modifier and/or Option.
3. Press and hold START to continue the cycle.
NOTE: If you happen to press Stop twice, the program clears and
your dryer shuts down. Restart the selection process.
The dryer rack is shipped in place in your dryer. Remove and
discard any packing material before use.
Use the TUMBLE FREE
TM
Non-Heated Dryer Rack for items that
you do not want to tumble dry, such as sweaters.
To use the dryer rack
Do not remove the lint screen.
1. Open dryer door.
_:°_..................................... A
A. Front edge
23