Download  Print this page

Stopping Or Restarting Your Dryer; Lock Controls; Loading Guide - Kenmore HE2 110.8656* Use & Care Manual

Hide thumbs

Advertisement

To use a Timed Cycle
Select a Timed Cycle.
Press MORE TIME or LESS TIME until the desired drying
time is displayed. Tap MORE TIME or LESS TIME, and the
time will change by 1-minute intervals. Press and hold
MORE TIME or LESS TIME, and the time will change by
5-minute intervals.
NOTE: The Timed Cycle Adjust features can be used only
with Timed Cycles.
Press TEMPERATURE until the desired temperature
illuminates.
To make changes to Time, Temperature, WRINKLE
GUARD
®
and Cycle Signal during a Timed Cycle:
Press STOP once.
Adjust the Time, Temperature, WRINKLE GUARD
Cycle Signal.
5. (OPTIONAL STEP) If desired, select WRINKLE GUARD
more details, see "WRINKLE GUARD
6. (OPTIONAL STEP) The Cycle Signal is preset to on. If desired,
you may turn the Cycle Signal off.
7. Press and hold START for approximately 1 second until dryer
starts. Be sure the door is closed.
If you do not press Start within 5 minutes of selecting a
cycle, the dryer automatically shuts off.

Stopping or Restarting Your Dryer

To pause/stop the dryer at any time
Open the door or press STOP once.
To restart the dryer
Close the door. Press and hold START until dryer starts.
To end/cancel your dryer at any time
Press STOP twice or open the door.
NOTE: Drying will continue from where the cycle was interrupted
if you close the door and press Start within 5 minutes. If the cycle
is interrupted for more than 5 minutes, the dryer will shut off.
Select new cycle settings before restarting the dryer.
®
and/or
®
. For
®
."

Lock Controls

This feature allows you to lock your settings to prevent
unintended use of the dryer. You can also use the control lock
feature to prevent unintended cycle or option changes during
dryer operation.
To enable the control lock feature:
Press and hold the CYCLE SIGNAL button for 3 seconds. The
CONTROLS LOCKED icon lights up, and a single beep tone is
heard. To unlock, press and hold the CYCLE SIGNAL button for
3 seconds. The indicator light turns off.

Loading Guide

Properly loading your dryer can lower your utility bill and prolong
the life of your garments.
Loading suggestions
Load the dryer by the amount of space items take up, not by
their weight.
Do not overload the dryer. This causes uneven drying and
wrinkling.
Super Capacity Dryers
Sturdy Work Clothes
4 jeans
4 workpants
4 workshirts
Towels
10 bath towels
10 hand towels
Mixed Load
3 sheets (1 king, 2 twin)
4 pillowcases
3 shirts
3 blouses
2 sweatpants
2 sweatshirts
14 washcloths
9 T-shirts
9 shorts
10 handkerchiefs
21

Hide quick links:

Advertisement

loading

This manual is also suitable for:

He2 110.8657