Installation Tools and Materials
You will need the following to install the Freedom Xi:
❐
Wire stripper
❐
Mounting screws or bolts
❐
#2 Phillips screwdriver
❐
3.5mm slot long neck screwdriver for WAGO
❐
Wrench for DC terminals (1/2" or adjustable)
❐
AC cable (that is, two-conductor-plus-ground cable), sized
appropriately for load and application
❐
Wire nuts or crimp connectors for AC wire and appropriate
tools
❐
Two 1/2" strain-relief bushings (supplied) for AC cables
❐
DC cable, sized appropriately for load and application
❐
Lugs for DC cables to fit 5/16" DC stud terminals as well as
appropriate tools (like a crimping tool)
❐
AC and DC disconnects and over-current protective devices
1. WAGO® manufactures connection devices such as terminal blocks and related accessories.
Many Freedom Xi models use WAGO terminal blocks as AC input and output connections.
975-0753-01-01
1
terminals
3