Testing In Shore Power Mode - Xantrex Freedom Xi 807-1000 Installation Manual

Basic Installation Procedures

Testing in Shore Power Mode

To test the Freedom Xi in shore power mode:
◆
With the appliance from the previous test still connected and
operating, connect the shore power source.
The Freedom Xi transfers the appliances to shore power. The
status LED on the display panel will change from yellow to a
ten-second flashing yellow and then green.
If the appliance operates, your installation is successful.
If the Inverter button on the Freedom Xi is turned ON, the
NOTE:
Freedom Xi will automatically supply the appliances with inverter
power if the shore power source fails or becomes disconnected.
If the Inverter button on the Freedom Xi is turned ON and shore
power voltage is too low (less than 90 volts AC), the unit will
transfer to inverter power to continue running your appliances.
Whether or not the Inverter button is turned ON, shore
NOTE:
power will pass through the Freedom Xi to the output when shore
power is within normal operating range.
28 Freedom Xi Installation Guide