Table of Contents
Advertisement
E-mail
The unit can automatically transmit an e-mail to an SMTP Server under numerous conditions i.e. on start
up, on receipt of an alarm, camera failure etc. This allows the unit to be installed in unmanned applications
where a Remote Video Response Centre (or Manager etc.) would be notified by e-mail if any of these
conditions occur.
Connection Profile
Mail Server Address
Username
Password
Recipient Email
Recipient Display Name
Reply to Email
Reply To Display Name
86
It is possible for the e-mail to be transmitted via the Ethernet network.
This setting presumes that the unit is connected to a LAN or WAN
and allocated a valid IP address.
This is the IP address or URL of the SMTP Server that the e-mail
will be sent to. The SMTP server will then forward this to the
intended recipient.
Enter the login details for the SMTP server.
Enter the login details for the SMTP server.
This is the e-mail address of the intended recipient.
This is the addressee name that will be shown in the email name field.
This field must be configured if the recipient is to reply to an e-mail.
The unit does not accept incoming e-mails therefore ensure this is a
valid e-mail address.
This is the 'reply to' name that will be shown in the email name field.
Dedicated Micros ©2011
Advertisement
Table of Contents
