Table of Contents
Advertisement
Global Actions
This menu allows configuration of the default relay actions supported on the unit.
The unit supports one onboard relay connection and global relay settings. This global relay can be triggered
under specific conditions i.e. on receipt of any alarm or notification of Activity Detection.
Image Protection Period
Alarm Display Alert
Normally
On
Status (Green)
Alarm In(Yellow)
Zone Act (Blue)
78
Select a time period (in days) that images associated with an alarm
will be protected from deletion.
Enable this setting to display an alarm text alert in the colour specified
in 'Alarm Colour' in the Zone Actions Menu.
Select whether the normal state of the relay contact should be Open
or Closed.
Select to enable detection of the accompanying condition. Options
available are; Zone, VMD/Activity, Camera Fail, System Set, Dial Out,
System Override, Camera Masked and Is Recording.
Opens the System->Status->Unit page.
Opens the Alarm->Inputs page.
Opens the Alarm->Zone Actions page.
Dedicated Micros ©2011
Advertisement
Table of Contents
