Table of Contents
Advertisement
Important:
48V is supplied to connection C. There is no voltage at Connection A. Do NOT connect
an ethernet cable from connection C to a DVR/Switch as this could cause irreparable
damage.
Note:
Layer 3 Enhanced Switch shown, normal Ethernet switch or DVR / NVR connection also
compatible. CamVu2000 camera shown, RJ45 socket on dome is compatible.
POE Injector Power Supply specification
Adaptor socket - 5.5mm diameter with a 2.1mm central circular pin
+48V goes to the centre pin of the power connector - 0V to the outside barrel
CAMERA SETTINGS (HYPERD VERSIONS ONLY)
Dedicated Micros ©2011
13
Advertisement
Table of Contents
